离子色谱法测定甲醇和噻吩中硫、氯含量

建立了测定工业用甲醇和噻吩中硫、氯含量的离子色谱检测方法。样品经(700±25)℃灼烧后,残留物用蒸馏水洗涤,利用离子色谱仪进行分析。甲醇和噻吩中硫、氯检测结果的相对标准偏差为1.04%~1.26%,加标回收率为99.2%~101.2%。该方法操作简单,精密度和准确度高,可用于大部分可燃性有机化合物中硫、氯含量的检测。     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

Facile Fabrication of Zirconia Modified Screen‐Printed Carbon Electrodes for Electrochemical Sensing of Phosphate

We report here a facile method to immobilize zirconia nanoparticles on a disposable screen‐printed carbon electrode (designated as ZrO₂‐SPCE) for phosphate sensor application. Simply by ultrasonicating a bare SPCE in a ZrO₂ slurry, ZrO₂ nanoparticles can be immobilized effectively on the electrode surface as verified by surface characterization evidences. Using ferricyanide as a redox probe, an increase in the charge transfer resistance (R_ct) of ferricyanide upon adsorption of phosphate on ZrO₂ is used for the determination of phosphate. This ZrO₂‐SPCE phosphate sensor shows a wide linear range up to 1 mM and a detection limit of 1.69 µM (S/N=3). Practical applicability of the ZrO₂‐SPCE is demonstrated by detecting phosphate content in human blood samples.     

Influence of insertion of a noble gas atom on halogen bonding in H2O···XCCNgF and H3N···XCCNgF (X = Cl and Br; Ng = Ar, Kr, and Xe) complexes

The H₂O···XCCNgF and H₃N···XCCNgF (X = Cl and Br; Ng = Ar, Kr, and Xe) complexes have been studied with quantum chemical calculations at the MP2/aug-cc-pVTZ level. The results show that the inserted noble gas atom has an enhancing effect on the strength of halogen bond, and this enhancement is weakened with the increase of noble gas atomic number. The methyl and Li substituents in the electron donor strengthen the halogen bond. The interaction energy increases from ?3.75 kcal/mol in H₃N–BrCCF complex to ?9.66 kcal/mol in H₂LiN–BrCCArF complex. These complexes have been analyzed with atoms in molecules, natural bond orbital, molecular electrostatic potentials, and energy decomposition calculations.     

Conventional strain energies of 1,2-dihydroazete, 2,3-dihydroazete, 1,2-dihydrophosphete, and 2,3-dihydrophosphete

The conventional strain energies of 1,2-dihydroazete, 2,3-dihydroazete, 1,2-dihydrophosphete, and 2,3-dihydrophosphete are determined within the isodesmic, homodesmotic, and hyperhomodesmotic models. Optimum equilibrium geometries, harmonic vibrational frequencies, and corresponding electronic energies and zero-point vibrational energies are computed for all pertinent molecular systems using SCF theory, second-order perturbation theory, and density functional theory and employing the correlation consistent basis sets cc-pVDZ, cc-pVTZ, and cc-pVQZ. Single-point fourth-order perturbation theory, CCSD, and CCSD(T) calculations employing the cc-pVTZ and the cc-pVQZ basis sets are computed using the MP2/cc-pVTZ and MP2/cc-pVQZ optimized geometries, respectfully, to ascertain the contribution of higher order correlation. Three DFT functionals, B3LYP, wB97XD, and M06-2X, are employed to determine whether they can yield results similar to those obtained at the CCSD(T) level.     

Long-term follow-up analysis of zolpidem in fingernails after a single oral dose

The determination of xenobiotics in keratinized matrices, such as nails and hair, has received considerable attention because of the relatively long detection window for compounds. The distribution of xenobiotics in fingernails, unlike hair, was equivocal. The main aim of this study was to use follow-up surveys to measure zolpidem profiles in nails after subjects consumed a single dose of the drug. In addition, the zolpidem concentrations in nails were compared with data for different biosamples, such as hair and blood from previous work. With these preconditions, a high-performance liquid chromatography–tandem mass spectrometry method was developed and validated for the determination of zolpidem in nails. Nails underwent alkaline hydrolysis and were extracted with diethyl ether. A Capcell Pak C18 MGII column was used to separate the target compound, and an API 4000 Qtrap mass spectrometer was used as a detector. The results for nail samples from seven subjects who had taken a single 10 mg zolpidem dose were significant: two relatively high zolpidem concentrations were observed in the long-term follow-up analysis of nails. The zolpidem concentration was less than 1.74 pg/mg and less than 3.29 pg/mg in fingernails and toenails, respectively. The subsequent peak concentration of zolpidem was observed between 10 and 15 weeks after each subject took a single dose of the drug. This result suggested that the germinal matrix area was a primary in vivo pathway for zolpidem secretion into the nail. The analysis of biosamples, such as nails, may be a useful adjunct to conventional methods of drug testing and hair analysis. Further research is needed concerning the contamination risk in analysis of nail biosamples.     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

A sensitive and specific ELISA for determining a residue marker of three quinoxaline antibiotics in swine liver

Methyl-3-quinoxaline-2-carboxylic acid (MQCA) is a possible residue marker for three quinoxaline veterinary medicines (olaquindox, mequindox, and quinocetone). The wide application of mequindox/quinocetone or the illegal use of olaquindox leads to MQCA residue in animal’s original food, thereby threatening the safety of human food. The indirect competitive enzyme-linked immunosorbent assay (IC-ELISA) with a specific coating antigen and monoclonal antibody (MAB) was established and optimized for detecting MQCA in swine liver. Samples were acidified with 2 mol?l^?1 hydrochloric acid, extracted with ethyl acetate–hexane–isopropanol (8?+?1?+?1, v/v/v) and then detected by IC-ELISA. The logarithm correlation of standards to OD values ranged from 0.2 to 200 μg?l^?1, with IC₅₀ of 6.46 μg?l^?1. Negligible cross-reactivity happened to five quinoxaline antibiotics (olaquindox, mequindox, quinocetone, carbadox, and cyadox) and the metabolite of carbadox and cyadox (quinoxaline-2-carboxylic acid). When spiked with 1 to 100 μg?kg^?1 of MQCA, the recoveries ranged from 85.44 to 100.02 %, with the intra-assay coefficient of variation (CV) of 6.64–10.57 % and inter-assay CV of 7.29–10.88 %. The limit of detection for MQCA was 1.0 μg?kg^?1 in swine liver. Furthermore, incurred samples were detected by the IC-ELISA and then conformed by a reported LC/MS/MS method, it shown that there was good correlation between the two methods. All these results indicated that the IC-ELISA method is appropriate for surveillance MQCA residue in animal tissues.

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.